1 Vane - 1 dozen

Traditional vanes set at a 2° offset typically generate around 320 RPM in flight. The 1Vane generates approximately 1400 RPM.

That increase in spin improves arrow stabilization and helps produce more consistent flight and tighter grouping.

In conventional vane systems, increased spin usually comes with a major tradeoff: increased drag. That added drag can reduce downrange performance and arrow efficiency.

The 1Vane was engineered differently.

Because of its unique design, the 1Vane achieves dramatically higher spin with only a nominal increase in drag. Traditional vanes are generally limited to 4–5° of offset, while the 1Vane effectively operates closer to 12° of offset.

In real-world shooting, many archers report equal or improved grouping out to 40–50 yards, along with improved broadhead stabilization and easier tuning.

If you are unsure of which size 1Vane you should purchase, the following guidelines will help you choose the right size.

·       If you know the inside diameter of your arrow:

o   All 0.166" arrows will use the micro size 1Vane

o   0.204" / 5mm arrows should use the micro size 1Vane. 

o   All shafts with an inside diameter greater than 0.204" should choose the standard size 1Vane.

·       If you know what nock size you are using:

o   X-Nock is micro size 1Vane.

o   H-Nock could use either size.  If using a wrap or want a fit that is not extremely tight, opt for the standard size.

o   S-Nock is standard size 1Vane.

·       You can measure the outside diameter of the shaft using a caliper.

·       A quick internet search will usually get you the outside diameter of your shaft.

·       Reach out to us via email or phone and we will let you know which size to purchase.

***Only select Custom if you have already communicated with us via email at info@1vane.com.  We offer custom diameter and select custom colors.

For the sound frequencies most likely to trigger whitetail deer reactions, the 1Vane performs among the best vanes tested.

Data from Archery Sound Lab shows the 1Vane ranks among the quietest vane systems evaluated.

That means less noise in flight and less opportunity for deer to react before arrow impact.

If you are unsure of which size 1Vane you should purchase, the following guidelines will help you choose the right size.

·       If you know the inside diameter of your arrow:

o   All 0.166" arrows will use the micro size 1Vane

o   0.204" / 5mm arrows should use the micro size 1Vane. 

o   All shafts with an inside diameter greater than 0.204" should choose the standard size 1Vane.

·       If you know what nock size you are using:

o   X-Nock is micro size 1Vane.

o   H-Nock could use either size.  If using a wrap or want a fit that is not extremely tight, opt for the standard size.

o   S-Nock is standard size 1Vane.

·       You can measure the outside diameter of the shaft using a caliper.

·       A quick internet search will usually get you the outside diameter of your shaft.

·       Reach out to us via email or phone and we will let you know which size to purchase.

***Only select Custom if you have already communicated with us via email at info@1vane.com.  We offer custom diameter and select custom colors.

The 1Vane measures approximately 1 inch at its widest point.

Most conventional vanes measure between 1.25 and 1.5 inches wide, depending on vane style and shaft diameter.

When shot point-down from a fall-away rest, the narrower 1Vane profile provides roughly 0.5 inches of additional clearance compared to standard vanes.

That added clearance can reduce contact issues with:
• Cables
• Sight housings
• Rest components

For archers struggling with clearance, this can be a major advantage.

If you are unsure of which size 1Vane you should purchase, the following guidelines will help you choose the right size.

·       If you know the inside diameter of your arrow:

o   All 0.166" arrows will use the micro size 1Vane

o   0.204" / 5mm arrows should use the micro size 1Vane. 

o   All shafts with an inside diameter greater than 0.204" should choose the standard size 1Vane.

·       If you know what nock size you are using:

o   X-Nock is micro size 1Vane.

o   H-Nock could use either size.  If using a wrap or want a fit that is not extremely tight, opt for the standard size.

o   S-Nock is standard size 1Vane.

·       You can measure the outside diameter of the shaft using a caliper.

·       A quick internet search will usually get you the outside diameter of your shaft.

·       Reach out to us via email or phone and we will let you know which size to purchase.

***Only select Custom if you have already communicated with us via email at info@1vane.com.  We offer custom diameter and select custom colors.

If you are unsure of which size 1Vane you should purchase, the following guidelines will help you choose the right size.

·       If you know the inside diameter of your arrow:

o   All 0.166" arrows will use the micro size 1Vane

o   0.204" / 5mm arrows should use the micro size 1Vane. 

o   All shafts with an inside diameter greater than 0.204" should choose the standard size 1Vane.

·       If you know what nock size you are using:

o   X-Nock is micro size 1Vane.

o   H-Nock could use either size.  If using a wrap or want a fit that is not extremely tight, opt for the standard size.

o   S-Nock is standard size 1Vane.

·       You can measure the outside diameter of the shaft using a caliper.

·       A quick internet search will usually get you the outside diameter of your shaft.

·       Reach out to us via email or phone and we will let you know which size to purchase.

***Only select Custom if you have already communicated with us via email at info@1vane.com.  We offer custom diameter and select custom colors.